Engineering Design Consultant
Omazaki Engineering is one of technical and engineering design consultants who provides consulting services for project ideas and engineering projects, both medium and large scale projects, in Indonesia. As design and engineering consultant in Indonesia, our design engineering consulting service is related to feasibility studies and basic design engineering projects. One of the goals of the feasibility study is to help you decide whether the project concept can proceed to the next stage or not. If deemed feasible, then proceed to the basic design development stage. The basic design is often referred to as front end engineering design (FEED). The output from FEED will be the design basis for the tender process.
Please contact us by filling out the form in contact for discussions or presentations about the services of this engineering design consultants in Indonesia.
What’s The Difference Between Design and Engineering
The main purpose of design and engineering is to solve problems. Both are designs that function to make things more useful than ever before. Or, realizing something from what doesn’t exist into existence.
Design focuses on meeting needs (goal oriented), while engineering focuses on dealing with problems (problem oriented) in meeting needs. Engineering focuses on basic functions and objectives while design goes beyond that. The design focuses on the big picture. Design is often associated with art, about external appearance without forgetting the purpose and function. While engineering is about details. Engineering describes the problem into specific details and processes until something is realized according to its aims and objectives. Despite the fact that sometimes there are often conflicts between design needs and engineering requirements.
Engineering is creative solutions and analysis that utilizes energy, materials, motion, information and technology to serve human needs in innovative ways. Whereas design is only design, which is used to make things, without utilizing these things.
So if asked what’s the difference between design and engineering, it can be illustrated as follows:
- The first case — The solution works, but it is very annoying.
- The second case — There is a satisfactory solution. its main function and purpose are in accordance with expectations. But, the appearance is “not good enough”.
The first case, good appearance (satisfying design), but the function is technically bad, aka “junk”. The second question, its main function (engineering) is fulfilled well but its outward appearance is unsatisfactory.
Our Key Expertise
- Electrical Engineering
- Control & Instrumentation
- Mechanical Engineering
- Environmental Engineering
- Renewable Energy
- Private project investor
- Large national and international engineering consulting firm
- Large national and international EPC company