Fire Detection & Alarm Systems Contractor
Omazaki Design & Build is a designer and contractor company for the installation of a fire detection and alarm systems located in Tangerang Selatan Banten, not too far from the capital city of Jakarta Indonesia. We design and install fire alarm systems that use cable or wireless, and both conventional and addressable systems. As contractors, we design, present and install sophisticated detectors and fire alarm systems equipment that can be adapted to the needs and requirements of industry and commercial buildings in Indonesia. We have highly qualified engineers with years of experience in this field.
———————————————
Overview of Fire Detection and Alarm
Fire detection and alarm system is part of fire protection system. It is primarily a life safety system meant for detecting the fire at its early stages then alarming the surroundings.
Main Components of Fire Detection and Alarm Systems
- Initiating Devices
- Detectors (smoke, flame, heat and gas)
- Manual pull station (manual call point/MCP)
- Water flow switch
- Valve temper switch
- Fire Control Alarm Panels
- Notification Appliances
- Buzzers
- Bells
- Horns
- Strobes
System Options
- Conventional systems
- Addressable systems
- Analogue addressable systems
- Wireless systems
Options for addressable systems
- Semi addressable system
- Full addressable system
The detectors can be smoke detector, flame detector, heat detector, and/or gas detector.
———————————————
Scope of Works (SOW)
Design Basis and Detailed Design
- Site survey and assessment
- Selecting the category of protection and coverage
- Mapping, zoning and grouping (configuration)
- Prepare and propose system’s options
- Prepare specification of main components and support materials
- Software simulation
- Mechanical and electrical layout
- Single-line diagram
- Bill of material (BoM) and cost estimation
Procurement & Installation
- Materials supply
- Fire detector (heat, flame, smoke, gas or multi sensor detector)
- Fire control alarm panels and support devices
- Manual Call Point (MCP), indicator lamp and fire bell
- Cable, terminator and cable support materials
- Emergency battery or UPS
- Other requested features
- Installation
- Testing, commissioning and start-up
Other services
- Project documents (as-built drawing, data-sheet, etc)
- Legal certification from Kemenaker
- Personnel hands-on training
- Troubleshooting assistance
———————————————
For further explations of our solutions and services related to fire detection and alarm systems installation design planning and contractors services in Indonesia, please contact us by filling out the form in contact.